Air pollution characteristics and their relationship with emissions and meteorology in the Yangtze River Delta region during 2014–2016

With rapid economic growth and urbanization, the Yangtze River Delta(YRD) region in China has experienced serious air pollution challenges. In this study, we analyzed the air pollution characteristics and their relationship with emissions and meteorology in the YRD region during 2014–2016. In recent years, the concentrations of all air pollutants, except O_3,decreased. Spatially, the PM_(2.5), PM_(10), SO_2, and CO concentrations were higher in the northern YRD region, and NO_2 and O_3 were higher in the central YRD region. Based on the number of non-attainment days(i.e., days with air quality index greater than 100), PM_(2.5) was the largest contributor to air pollution in the YRD region, followed by O_3, PM_(10), and NO_2.However, particulate matter pollution has declined gradually, while O_3 pollution worsened.Meteorological conditions mainly influenced day-to-day variations in pollutant concentrations. PM_(2.5) concentration was inversely related to wind speed, while O_3 concentration was positively correlated with temperature and negatively correlated with relative humidity.The air quality improvement in recent years was mainly attributed to emission reductions.During 2014–2016, PM_(2.5), PM_(10), SO_2, NO_x, CO, NH_3, and volatile organic compound(VOC)emissions in the YRD region were reduced by 26.3%, 29.2%, 32.4%, 8.1%, 15.9%, 4.5%, and0.3%, respectively. Regional transport also contributed to the air pollution. During regional haze periods, pollutants from North China and East China aggravated the pollution in the YRD region. Our findings suggest that emission reduction and regional joint prevention and control helped to improve the air quality in the YRD region.     

CFB锅炉环保项目SNCR工艺优化提效研究

某炼化企业自备电厂循环流化床锅炉(简称CFB锅炉)环保项目所采用的脱硝方法为选择性非催化还原脱硝(简称SNCR),使用的还原剂为尿素,SNCR系统投用后,虽然能使NOX排放量显著下降,但尿素用量明显过度,增加了企业脱硝成本,并导致脱硫废水氨氮含量超标。为了应对这一情况,本研究主要通过现场调节锅炉运行参数,以及基于CFD建模的方法研究出高效可靠的SNCR工艺优化调整策略及方法,结果表明:在锅炉燃料煤∶焦=4∶1掺烧比例下,氧含量不宜超过3%,有利于降低NOX生成量;控制减少石灰石量有助于提升NOX的脱除效率;通过模拟计算发现下半部喷枪起到主要的脱硝作用,可适当减少上半部喷枪、提升环下半部喷枪的尿素喷入量来提高脱硝效率。为煤焦混烧CFB锅炉脱硝系统的优化提供指导和借鉴作用。     

Effects of significant damage of flame gap surfaces in flameproof electrical apparatus on flame gap efficiency

Electrical apparatus for use in the presence of explosive gas atmospheres has to be specially designed to prevent the apparatus from igniting the gas. Flameproof design is one of several options, and one requirement is then that any holes and slits in the enclosure wall be designed to prevent a possible gas explosion inside the enclosure from being transmitted to an explosive gas cloud outside it. Current standards (IEC) require that joint surfaces have a surface roughness of <6.3 μm. Any damaged joint surface has be restored to this quality. The present investigation has demonstrated that flame gap surfaces in flameproof electrical apparatuses can suffer considerable mechanical and corrosive damage before the flame gaps no longer function satisfactorily. In some cases very significant mechanical surface damage in fact improves the gap performance. This indicates that current high costs of repairing and replacing flameproof electrical apparatus in process plants offshore and onshore can be reduced considerably without any increase of the explosion risk.     

Reporting practices in merchant shipping,and the identification of influencing factors

The objective of this paper is to identify the factors determining the reporting frequency of experience data e.g. incidents and accidents. The empirical setting is the Norwegian controlled merchant fleet. Data were collected from a survey carried out in 2006, where 1262 questionnaires were gathered from 76 vessels. The data were subjected to explorative factor analysis, method of principal component and varimax rotation. Seven factors, representing latent dimensions of safety culture, were extracted. Internal consistency (Cronbach Alpha) and scale reliability were found to be acceptable. The factor scores were used in an ordered logistic regression to examine the factors’ relationships to reporting frequency. The results show that enhanced safety related training, a trusting and open relationship among the crew, safety oriented ship management, performance of pro-active risk identification activities and feedback on reported events all are significantly related to higher reporting frequency. On the other hand, demand for efficiency and lack of attention to safety from shore personnel, are significantly related to lower reporting frequency. The results also show a significantly lower reporting frequency among those who have worked with their local manager less than 1 year. Bulk and dry cargo vessels also show significantly lower reporting frequency than those working on liquid bulk carriers.     

Numerical simulation of propane detonation in medium and large scale geometries

A modelling strategy has been developed for consequence analysis of medium and large scale gaseous detonation. The model is based on the solution of Euler equations with one-step chemistry. The Van Leer flux limited method which is a total variation diminishing scheme is used for shock capturing. Preliminary calculations were firstly conducted for small domains with fine grids which resolve the wave, relatively coarse grids which have less than 10 grids across the wave and coarse grids in which the minimum grid size is larger than the wave thickness to ensure that the reaction scheme has been properly tuned to capture the correct detonation pressure, temperature and velocity in the resolutions used in the different cases. The model was firstly tested against a medium scale detonation test in a shock tube with U-bends. Reasonably good agreement is achieved on detonation pressure and mean shock wave velocities at different measuring segments of the tube. Following the validation, the detonation of a hypothetical planar propane-air cloud is simulated. The predictions uncovered some interesting features of such large scale detonation phenomena which are of significance in the safety context, especially for accidental investigations. The findings from the present analysis are in line with the forensic evidence on damages in some historic accidents and challenges previous analysis of a major accident in which forensic evidence suggested localised detonation but was considered as the consequence of fire storms by the investigation team.     

Modelling spills of water-reactive chemicals

This paper describes part of a programme of work undertaken at the Health and Safety Laboratory (HSL) to investigate the behaviour of selected water-reactive chemicals. Following an accidental release, such substances react exothermically with any water present, generating acidic vapours. The STAWaRS (Source Term Assessment of Water Reactive Substances) software was developed for the Health and Safety Executive (HSE) by ESR Technology to model this complex process. The aims of the study described here were to provide experimental validation of the heats of hydrolysis used within STAWaRS, and to perform sensitivity studies on selected STAWaRS input parameters.The heat of hydrolysis of acetyl chloride was measured and showed good correlation with the value used within STAWaRS. Some of the variables that influence the severity of acetyl chloride spills are examined, with reference to predictions made by the STAWaRS model. The heats of hydrolysis of titanium tetrachloride previously measured at HSL are also discussed, and the effect of adopting these experimentally derived values for modelling spills is shown for a hypothetical land use planning case. This study demonstrates the importance of using experimentally validated values for STAWaRS input parameters.     

Continuing Issues in the Limitations of Pesticide Use in Developing Countries

The rationale for pesticide use in agriculture is that costs associated with pesticide pollution are to be justified by its benefits, but this is not so obvious. Valuing the benefits by simple economic analysis has increased pesticide use in agriculture and consequently produced pesticide-induced “public ills.” This paper attempts to explore the research gaps of the economic and social consequences of pesticide use in developing countries, particularly with an example of Nepal. We argue that although the negative sides of agricultural development, for example- soil, water, and air pollution; pest resistance and resurgence; bioaccumulation, bio-magnification; and loss of biodiversity and ecosystem resilience caused by the use of pesticides in agriculture, are “developmental problems” and are “unintentional,” the magnitude may be increased by undervaluing the problems in the analysis of its economic returns. Despite continuous effort for holistic system analyses for studying complex phenomena like pesticides impacts, the development within the academic science has proceeded in the opposite direction that might have accelerated marginalization of the third world subsistence agricultural communities. We hypothesize that, if these adversities are realized and accounted for, the benefits from the current use of pesticides could be outweighed by the costs of pollution and ill human health. This paper also illustrates different pathways and mechanisms for marginalization. In view of potential and overall negative impacts of pesticide use, we recommend alternative ways of controlling pests such as community integrated pest management (IPM) along with education and training activities. Such measures are likely to reduce the health and environmental costs of pesticide pollution, and also enhance the capabilities of third world agricultural communities in terms of knowledge, decision making, innovation, and policy change.     

How to Consider the Value of Farm Animals in Breeding Goals. A Review of Current Status and Future Challenges

The objective of this paper is to outline challenges associated with the inclusion of welfare issues in breeding goals for farm animals and to review the currently available methodologies and discuss their potential advantages and limitations to address these challenges. The methodology for weighing production traits with respect to cost efficiency and market prices are well developed and implemented in animal breeding goals. However, these methods are inadequate in terms of assessing proper values of traits with social and ethical values such as animal welfare, because such values are unlikely to be readily available from the product prices and costs in the market. Defining breeding goals that take animal welfare and ethical concerns into account, therefore, requires new approaches. In this paper we suggest a framework and an approach for defining breeding goals, including animal welfare. The definition of breeding goals including values related to animal welfare requires a multidisciplinary approach with a combination of different methods such as profit equations, stated preference techniques, and selection index theory. In addition, a participatory approach involving different stakeholders such as breeding organizations, food authorities, farmers, and animal welfare organizations should be applied. We conclude that even though these methods provide the necessary tools for considering welfare issues in the breeding goal, the practical application of these methods is yet to be achieved.     

Optimal Pollution Trading Without Pollution Reductions: A Note1

García, Jorge H., Matthew T. Heberling, and Hale W. Thurston, 2011. Optimal Pollution Trading Without Pollution Reductions: A Note. Journal of the American Water Resources Association (JAWRA) 47(1):52‐58. DOI: 10.1111/j.1752‐1688.2010.00476.x Abstract: Various kinds of water pollution occur in pulses (e.g., agricultural and urban runoff). Ecosystems, such as wetlands, can serve to regulate these pulses and smooth pollution distributions over time. This smoothing reduces total environmental damages when “instantaneous” damages are marginally increasing. This paper introduces a water quality trading model between a farm (a pulse‐pollution source) and a firm (a more steady pollution source) where the object of exchange is the “temporary” retention of runoff as opposed to total runoff reductions. The optimal trading ratio requires firm emissions to be offset by more than a proportional retention of the initial agricultural runoff pulse. The reason is twofold: (1) emissions are steady or constant over time and, in this sense, have relatively larger environmental impact; and (2) certain kinds of runoff management cause delayed environmental damages.     

Life cycle assessment of natural gas combined cycle power plant with post-combustion carbon capture,transport and storage

Hybrid life cycle assessment has been used to assess the environmental impacts of natural gas combined cycle (NGCC) electricity generation with carbon dioxide capture and storage (CCS). The CCS chain modeled in this study consists of carbon dioxide (CO₂) capture from flue gas using monoethanolamine (MEA), pipeline transport and storage in a saline aquifer.Results show that the sequestration of 90% CO₂ from the flue gas results in avoiding 70% of CO₂ emissions to the atmosphere per kWh and reduces global warming potential (GWP) by 64%. Calculation of other environmental impacts shows the trade-offs: an increase of 43% in acidification, 35% in eutrophication, and 120–170% in various toxicity impacts. Given the assumptions employed in this analysis, emissions of MEA and formaldehyde during capture process and generation of reclaimer wastes contributes to various toxicity potentials and cause many-fold increase in the on-site direct freshwater ecotoxicity and terrestrial ecotoxicity impacts. NO_x from fuel combustion is still the dominant contributor to most direct impacts, other than toxicity potentials and GWP. It is found that the direct emission of MEA contribute little to human toxicity (HT < 1%), however it makes 16% of terrestrial ecotoxicity impact. Hazardous reclaimer waste causes significant freshwater and marine ecotoxicity impacts. Most increases in impact are due to increased fuel requirements or increased investments and operating inputs.The reductions in GWP range from 58% to 68% for the worst-case to best-case CCS system. Acidification, eutrophication and toxicity potentials show an even large range of variation in the sensitivity analysis. Decreases in energy use and solvent degradation will significantly reduce the impact in all categories.